MIL-W-90490
3.5 Identification of product
3.5.1 Identification label. Each box shall have a label or tag marked with the following information and attached in such a manner as to remain in place until all the cut pieces have been removed. The color of the label shall be light in intensity to permit easy reading of printed, stamped, or typed markings. The use of handwritten entries is prohibited. The label shall be legibly printed with water-insoluble ink with the following information:
a. Stock number b. Nomenclature
c. Specification MIL-W-90490 d. Color
e. Actual pieces
f. Contract number and date of manufacture (month and year)
g. Supplier's name
h. Name of contracting agency
3.5.2 Fiber identification. Each box of webbing shall be labeled, ticketed, or invoiced for fiber content in accordance with the Textile Fiber Products Identification Act.
3.6 Workmanship. The finished webbing shall be clean, evenly woven, and shall conform to the quality and grade of product established by this specification. The occurrence of defects shall not exceed the applicable acceptable quality levels.
4. QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements (examinations and tests) as specified herein. Except as otherwise specified in the contract or purchase order, the contractor may use their own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to ensure that the supplies and services conform to prescribed requirements.
4.1.1 Responsibility for compliance. All items must meet all requirements of sections 3 and 5. The inspection set forth in this specification shall become a part of the contractor's overall inspection system or quality program. The absence of any inspection requirements in the specification shall not relieve the contractor of the responsibility of ensuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract. Sampling inspection, as part of manufacturing operations, is an acceptable practice to ascertain conformance to
requirements; however, this does not authorize submission of known defective material, either indicated or actual, nor does it commit the Government to accept defective material.
Source: https://assist.dla?.mil -- Downloaded: Check the source to verify that this is the current version before use.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business