INCH-POUND
MILITARY SPECIFICATION
MIL-D-9049D
3 November 1990
SUPERSEDING MIL-W-9049C
17 February 1984
WEBBING, TEXTILE, NYLON, LOCKING LOOP
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers one type of nylon webbing furnished in cut pieces with integrally woven loops.
1.2 Classification. The webbing furnished in cut pieces shall be of the following classes, as specified (see 6.2):
a. Class 1 - 2-3/4 + 1/8 inch between outside loop ends (see figure 1) b. Class 2 - 3-3/4 + 1/8 inch between outside loop ends (see figure 1) c. Class 3 - 6 + 3/16 inch between outside loop ends (see figure 1)
2. APPLICABLE DOCUMENTS
2.1 Government documents
2.1.1 Specifications and standards. The following specifications and standards form a part of this specification to the extent specified herein. Unless otherwise specified the issues of these documents shall be those listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation. (see 6.2)
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: ASD/ENES, Wright-Patterson AFB OH 45433-6503 by using the self-ad- dressed Standardization Document Improvement Proposal
AMSC N/A FSC 1670
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business