MIL-T-43238C
4.4.3 End item visual examination. The end item shall be examined for the
defects listed below. The lot size shall be expressed in units of tables. The
sample unit shall be on table. The inspection level shall be II and the
acceptable quality level (AQL), expressed in terms Of defects Per hundred units,
shall be 6.5 for major defects and 15.0 for total (major and minor combined)
defects.
Classification
Minor
Major
Defects
Examine
X
Any area of rust or corrosion
Finish, protective
Any breaks, scratches, or tool
X
marks through plating to metal
Dirt, smudge, oil, grease, or foreign
Construction and
X
matter
workmanship
Any component missing, cracked, mis-
aligned (e.g., leg assembly does
not fold to collapsed position or
unfold to perpendicular in set-up
position) except as otherwise
X
classified herein.
X
Any sharp edge or burrs.
Parts not assembled or joined
X
specified.
Any departure from design indicated
Design
on drawing, except as otherwise
X
classified herein.
Scratches or gouges; warped or distorted X
Table top
Any opening in adhesive line between
Bonding
X
metal and cushion strips
Any weld missing, continuous, under-
Welding
cut, overlapped, cracked, porous, or
X
burned through
X
Flux deposit not removed
X
Surfaces not smooth
Missing or wrong type or size, except
Hardware (screws,
X
as otherwise classified herein
nuts, eyebolts,
Rivet (Items 1-14, 1-19 and 1-37)
pins, rivets)
X
missing
Rivet riot properly set (i.e., head not
X
flush, or cracked on peening)
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business