MIL-T-43238C
3. REQUIREMENTS
*
3.1 First article. When specified, a sample shall be subjected to first
article inspection (see 4.3, 6.2, and 6.4).
3.2 Materials (see 6.5) and components. The materials and components used
shall conform to the applicable referenced documents and standards specified
on Drawings 11-1-327, 11-1-328 and 11-1-684.
3.3 Construction. The fabrication of components and assembly of the table
shall conform to the requirements specified herein and as shown on the
applicable drawings.
3.3.1 Assembly. Leg, frame and table body assemblies shall be formed,
riveted and welded in accordance with drawing details to insure proper
functioning in the folded and set-up configurations.
3.3.2 Bonding. The cushion strips shall be bonded to the metal surfaces
with the adhesive specified on Drawing 11-1-684. Surface preparation,
adhesive application and bonding process shall be in accordance with the
adhesive manufacturer's recommendations. The bond shall be continuous with no
separations between the metal surface and cushion strips.
3.3.3 Welding. Surfaces to be welded shall be free from oxide, scale,
grease and other foreign matter. Welds shall be continuous, free from
undercut, overlap cracks, porosity and burn-through. Flux deposits (when flux
is used) shall be removed from finished welds. Rough surfaces shall be
smoothed.
3.4 Electrical system. Components, details and test shall be as specified
on Drawing 11-1-328. When tested, there shall be no evidence of failure or
malfunction of the lamps or electrical components.
3.5 Marking for identification. An identification plate shall be
Permanently attached to the table in the location shown of Drawing 11-1-327,
The following information shall be permanently marked in the ¼ inch minimum
size characters.
Nomenclature
Manufacturers name
Contract number
Year of manufacture
Federal stock number
The provisions of MIL-STD-130 shall apply.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business