MIL-DTL-27444E
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article inspection
in accordance with 4.3.
3.2 General requirements. The requirements of the applicable drawings for the required net type
and those details referenced therein apply as requirements of the specification, with the
exceptions and additions specified herein. Unless otherwise noted herein or in the contract, in
the event of a conflict between the specification and drawings, the specification shall take
precedence.
3.2.1 Materials. The nets shall be constructed of those materials specified in the applicable detail
drawing and sub-level drawings.
3.3 Construction. The nets shall be constructed so that no part will work loose in service. They
shall be built to withstand the strains, jars, vibrations, and conditions incident to shipping,
storage, and service.
3.4 Reliability. The nets shall be constructed as specified herein to assure the optimum service
life under all service conditions specified herein, and shall be acceptably demonstrated during the
testing specified herein.
3.5 Net configuration. The nets shall be constructed in accordance with the applicable detail
drawing.
3.5.1 Strength. The following factors and load configuration shall be used in the construction of
the nets:
3.5.1.1 Maximum stock height and load. The cargo stock height shall be 96 inches maximum
and the total maximum load shall be 10,000 pounds for Types I, II, and V nets.
3.5.1.2 Load configuration. The load shall be considered to be rectangular boxes approximately
20" x 20" x 12" for Type I (Type V) and Type II nets. All boxes are free to move relative to
adjacent boxes.
3.5.1.3 Maximum range of adjustment. The Type I (Type V) net set shall enclose on an 84" x
108" x 96" load. The Type II net shall enclose a load 84" x 108" and have a max range of
adjustment of 190" and 167" along the length and width, respectively, of the net.
3.6 Net assembly. A net assembly shall consist of two side nets and one top net. A combination
of two of the TYPE I or TYPE V nets with a TYPE II net shall make one set.
3.7 Webbing. The webbing shall conform to MIL-W-4088 and the resin impregnated
requirements of MIL-W-27265; except for the testing portion, the minimum breaking strengths
of the webbings shall be in accordance with TABLE I.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business