MIL-DTL-27444E
system commands. Packaging data retrieval is available from the managing Military Department s or
Defense Agency s automated packaging files, CD-ROM products, or by contacting the responsible
packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is
not mandatory.)
6.1 Intended use. The nets are intended for use in securing cargo to pallets conforming to MIL-
DTL-27443 as applicable. The cargo pallets are designed for use on military aircraft and support
equipment rail systems, thus the nets are unique to the military.
6.2 Acquisition Requirements. Acquisition documents should specify the following:
a. Title, number, and date of this specification.
b. Type required (see 1.2).
c. When first article is required (see 3.1).
d. Packaging requirements (see 5.1).
6.3. Classification deletions. Types III and IV nets are obsolete and are no longer available for
procurement. These nets were previously used in conjunction with the HCU-12/E half pallets,
but the requirement no longer exists for these items.
6.4 Definitions. For the purpose of this specification, the following definitions will apply.
6.4.1 Breaking Strengths. The minimum breaking strength for any webbing specimen type can
be found in tables II and III of MIL-W-4088.
6.4.2 463L. Cargo Handling System to transport cargo in aircraft, within air terminals, and on
motorized and non-motorized vehicles.
6.5 Subject term (key word) listing.
Assembly
Load test
Specimen
Webbing
6.6 Changes from previous issue. Marginal notations are not used in this revision to identify
changes with respect to the previous issue due to the extent of the changes.
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business