MIL-P-44247(GL)
4.2 Classification of inspection. The inspection requirements specified
herein are classified as follows:
First article inspection (see 4.3).
a.
b.
Quality conformance inspection (see 4.4).
4.3 First article inspection. when a first article is required (see 6.2), it
shall be examined for the defects specified in table 1. The presence of any
defect shall be cause for rejection of the first article.
4.4 Quality conformance inspection. unless otherwise specified, sampling for
inspection shall be performed in accordance with MIL-STD-105.
4.4.1 Component and material inspection. In accordance with 4.1 components.
and materials shall be inspected in accordance with all the requirements of
referenced specifications, drawings, and standards unless otherwise excluded,
amended, modified, or qualified in this document or applicable documents.
4.4.2 In-process inspection. Inspection of sub-assemblies shall be made to
ascertain that construction details which cannot be examined in the finished
product are in accordance with specified requirements, The Government reserves
the right to exclude from consideration for acceptance, any material or service
for which in-process inspection has indicated nonconformance
4.4.3 End item visual examination. The end item shall be examined for the
defects listed in table 1. The lot size shall be expressed in units of packs.
The sample unit shall be one pack. The inspection level shall be It and the
acceptable quality level (AQL), expressed in terms of defects per hundred units
shall be 1.0 for major defects and 6,5 for total (major and minor combined)
defects,
TABLE I. End item visual defects
Classification
Minor
Major
Defect
Examine
Any cut, hole, tear, needle chew
Material defects
x
or weakening defect in material.
and damages (cloth)
Any abrasion marks, broken or missing
x
yarns or multiple floats.
x
Any mend, darn or patch.
x
Needle chews.
x
Any hole, cut or tears
Felt
x
Any hole, tear, cut or frayed edges
Webbing or tape
Needle chews:
x
up to 1/8 inch in length.
x
- 1/8 inch or more in length.
x
Not continuous, i.e., spliced
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business