MIL-DTL-44476A(GL)
TABLE I. End item visual defects (cont'd.)
Classification
Defect
Major Minor
Examine
Any component or required operation omitted or not as
Components and
specified (unless otherwise classified herein)
122
assembly
123
Needle chews
124
Mends, dams, or patches
Any turn under on stitched ends of webbing
125
not securely caught in W-W stitching
Turn under on ends of straps, chapes, and loops
212
less than specified by more than 1/8 inch
Omitted, illegible, incorrect, misplaced, or size
Marking and
213
of characters not as specified
identification
Noticeable spots or stains, i.e., grease, oil
Cleanness
ink, dirt not removed; thread ends not
214
trimmed to 1/4 inch or less
4.3.4 End item dimensional examination. The end items shall be examined for conformance
to the dimensions specified on the drawings. Only those dimensions that can be evaluated
without damaging or disassembling the end items shall be examined. Any dimension not within
the specified tolerance shall be classified as a defect.
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in
the contract or order (see 6.2). When actual packaging of materiel is to be performed by DoD
personnel, these personnel need to contact the responsible packaging activity to ascertain
requisite packaging requirements. Packaging requirements are maintained by the Inventory
Control Point's packaging activity within the Military Department or Defense Agency, or within
the Military Department's System Command. Packaging data retrieval is available from the
managing Military Department's or Defense Agency's automated packaging files, CD-ROM
products, or by contacting the responsible packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature which maybe helpful,
but is not mandatory).
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business