MIL-DTL-44476A(GL)
TABLE I. End item visual defects (cont'd.)
Classification
Major Minor
Defect
Examine
Broken or bent; corroded areas; burrs or
Hardware
104
sharp edges
Any required component not specified type
105
or size
Any required component not functioning,
106
improperly set or reversed
Not functioning properly, failing to affect
Slide fastener
107
closure or to open freely
108
Not specified type or size
109
Slider jams or fails to interlock
110
Thong omitted
111
Damaged teeth
205
1/2 inch or less
Open seams and
112
More than 1/2 inch
run-offs
A seam shall be classified as open when one
NOTE:
or more stitches joining a seam are broken or
when two or more skipped stitches or run-offs
occur. On a double stitching seam, a seam shall
be considered open when either one or both sides
of the seam are open.
Improperly or loosely applied showing
Binding
113
raw edge of fabric
End of binding not finished as specified
206
or overlapped less than 1 inch
114
Wrong seam or stitch type
Seam and stitch type
Loose, resulting in a loosely exposed
Stitch tension
top or bobbin thread; tight, resulting
in excessive tightness of fabric on
115
seams
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business