NOT MEASUREMENT SENSITIVE
MIL-DTL-40137F
2 November 2004
SUPERSEDING
MIL-C-40137E
20 March 1984
MILITARY SPECIFICATION
CLEVISES, RIGGING, AIR DELIVERY TYPE: GENERAL SPECIFICATION FOR
This specification is approved for use by all departments and agencies of the Department
of Defense.
1. SCOPE
1.1 Scope. This specification covers the general requirements for three types of air
delivery rigging clevises, commonly referred to as shackles.
1.2 Classification. Clevises are of the following types as specified (see 6.2):
Type I - Clevis, suspension (PS70087)
Type II - Clevis, tiedown (PS70085)
Type III - Clevis, riser (PS70086)
1.3 Part or identifying number (PIN). The PIN to be used for clevises acquired to this
specification is created as follows:
M 40137 - 2
Dash number: Type I - PS70087
Type II - PS70085
Type III - PS70086
Specification number
Prefix for military specification
Comments, suggestions, or questions on this document should be addressed to Defense Supply
Center Richmond, ATTN: DSCR-VEB, 8000 Jefferson Davis Highway, Richmond, VA 23297-
5616 or e-mailed to STDZNMGT@dla.mil. Since contact information can change, you may
want to verify the currency of this address information using the ASSIST Online database at
https://assist.daps.dla.mil.
AMSC N/A
FSC 1670
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business