MIL-DTL-27443F (USAF)
AMERICAN SOCIETY FOR QUALITY CONTROL (ASQC)
ANSI/ASQC Z1.4
Sampling Procedures and Tables for Inspection by Attributes
(DoD adopted)
(Application for copies should be addressed to the American Society for Quality Control, 611 East
Wisconsin Avenue, Milwaukee WI 53202.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the
references cited herein (except for related associated specifications or specification sheets), the text of
this document takes precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article inspection in
accordance with 4.3.
3.2 Materials.
3.2.1 Protective treatment. The materials shall be as specified by applicable drawings and details
thereof. When materials are used in the construction of the pallets that are subject to deterioration when
exposed to climatic and environmental conditions likely to occur during service usage, they shall be
protected against such deterioration in a manner that will in no way prevent compliance with
performance requirements of this specification (see 4.5.1). The use of any protective coating that will
crack, chip, or scale with age or extreme of climatic and environmental conditions shall be avoided.
3.2.2 Metals. Metals shall be of the corrosion-resistant type or treated to resist corrosion due to salt
spray or atmospheric conditions likely to be met in storage or normal service (see 4.5.1).
3.2.2.1 Dissimilar metals. Contact between dissimilar metals shall be avoided wherever possible (see
4.5.1). Wherever such contacts are unavoidable, they shall be insulated in a manner approved by the
procuring activity. Dissimilar metals are defined in MIL-STD-889.
3.2.3 Adhesive. The adhesive used for bonding the core to the skin and the rails shall be vinyl phenolic
FM-47 liquid adhesive in accordance with MMM-A-132, Type I, Class 3. The adhesive to be used to
bond the balsa shall be a Urea-Resin type in accordance with ASTM D4690 and the following
requirements.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business