MIL-PRF-9884F
3.3 Interface and interoperability requirements.
3.3.1 Dimensions The energy dissipator pad shall be 36 inches by 96 inches + 1/2 inch and
the thickness shall be 3 inches + 1/16 inch.
3.3.2 Surfaces. The top and bottom surfaces of the energy dissipator pad shall be capable of
being bonded to other pads or bonded to wood using adhesive paste (NSN 8040-00-273-8713)
(see 6.6).
3.4 Support or ownership requirements.
3.4.1 Weight. The weight of one cubic foot of the energy dissipator pad shall not exceed two
pounds.
3.4.2 Water resistant. The energy dissipator pad shall be resistant to water without
degradation of the energy dissipating characteristics of the pad.
3.4.3 Moisture content. The percent of moisture of the energy dissipator pad shall not exceed
12%.
3.4.4 Water adsorptiveness. The energy dissipator pad shall have a maximum water
adsorptiveness of 100 grams per square meter.
3.5 Environmental requirements. The energy dissipator pad shall be functional in ambient
temperatures from -400F to +1250F.
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are classified as
follows:
a. First article inspection (see 4.1.1)
b. Conformance inspection (see 4.1.2)
4.1.1 First article inspection. When a first article inspection is required (see 3.1 and 6.2), the
first article shall be examined for all the verifications listed in table I.
4.1.2 Conformance inspection. Conformance inspection includes those examinations and tests
from table I as defined in the contract or purchase order (see 6.2 and 6.4).
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business