MIL-DTL-44477A(GL)
TABLE I. End item visual defects (cont'd.)
Classification
Major Minor
Defect
Examine
124
Not specified type or size
Jacketed wire rope
Ends not nylon coated or wire material
125
not completely enclosed
Surface of nylon coated end not smooth or
126
flush with unmelted jacketed surface
127
Missing
Swaged wire rope
128
Not specified type or size
sleeve
129
Not swaged as specified
217
One sleeve swage omitted
130
Two sleeve swages omitted
Swaged excessively tight, cutting wire
131
rope material
Swaged loosely, permitting sleeve to
132
rotate freely
4.3.4 End item dimensional examination. The end items shall be examined for conformance to
the dimensions specified on the drawings. Only those dimensions that can be evaluated without
damaging or disassembling the end items shall be examined. Any dimension not within the
specified tolerance shall be classified as a defect.
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in
the contract or order (see 6.2). When actual packaging of materiel is to be performed by DoD
personnel, these personnel need to contact the responsible packaging activity to ascertain requisite
packaging requirements. Packaging requirements are maintained by the Inventory Control Point's
packaging activity within the Military Department or Defense Agency, or within the Military
Department's System Command. Packaging data retrieval is available from the managing Military
Department's or Defense Agency's automated packaging files, CD-ROM products, or by contacting
the responsible packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature which maybe helpful, but
is not mandatory).
6.1 Intended use. The container assembly is used by airborne personnel during parachute
operations.
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business