MIL-DTL-25959H
1.3 Part or Identifying Number (PIN). PINs to be used for aircraft cargo tie down tensioners
acquired to this specification are created as follows:
M
25959-
III
Type
Specification number
Prefix
Type
Capacity
Government
designation
III
10,000 lbs
CGU-8/A
IV
25,000 lbs
CGU-7/A
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this
specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must
meet all specified requirements of documents cited in sections 3, 4, or 5 of this specification,
whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-DTL-6458
Chain Assemblies, Single Leg, Aircraft Cargo Tie Down
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-130
Identification Marking of U.S. Military Property
MIL-STD-810
Environmental Engineering Considerations and
Laboratory Tests
MIL-STD-882
System Safety
MIL-STD-889
Dissimilar Metals
(Copies of these documents are available online at https://assist.dla.mil/quicksearch/ or from the
Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA
19111-5094.)
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business