MIL-T-43694(GL)
Classification
Examine
Major
Minor
Defect
Thread (nylon)
X
Not type, class, or size specified
X
Color not as specified
Stitches and
X
Stitching pattern not as specified
stitching
X
Any row of stitching missing
One stitch per inch fewer than minimum
or more than maximum specified
X
Two or more stitches per inch fewer than
X
minimum or more than maximum specified
Thread breaks, bobbin runouts, skipped
X
stitches and runoffs
Ends of stitching not backstitched or
X
secured as specified
Tension loose resulting in loose top or
bottom thread, or tight tension causing
puckering of material at stitch line
X
Needle chews or bunched stitching
X
Construction
Any component missing, not assembled
and assembly
or joined as specified
X
Marking
Omitted, incorrect, illegible; location,
size or color not as specified
X
Workmanship
Grease, oil, ink smears, dirt or other
foreign matter; thread ends not trimmed
throughout
X
4.4.2.2 Dimensional examination. - The sample unit for this examination
shall be one assembly or component, as applicable. The examination shall be
made to determine compliance with dimensions specified on the drawings. Any
nonconformance shall constitute a defect.
4.4.3 Inspection levels and acceptable quality levels for examination. In-
spection levels and acceptable quality levels (AQLs), expressed in defects per
hundred units, shall be aS follows:
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business