INCH-POUND
MIL-DTL-44076B
31 July 2006
SUPERSEDING
MIL-L-44076A
30 July 1990
DETAIL SPECIFICATION
LOWERING LINE ASSEMBLY
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification covers the requirement for one type of lowering line with or
without an adapter web.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are cited in other sections 3, 4, and 5 of
this specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must
meet all specified requirements documents cited in sections 3, 4, and 5 of this specification,
whether or not they are listed.
2.2 Government documents.
2.2.1 Drawings. The following other Government drawing forms a part of this document to
the extent specified herein. Unless otherwise specified, the issues are those cited in the
solicitation or contract.
DRAWINGS
NATICK SOLDIER CENTER
11-1-2530
- Lowering Line Assembly
Comments, suggestions, or questions on this document should be addressed to Natick Soldier
Center, ATTN: AMSRD-NSC-AD-AD, J. Riley, Natick, MA 01760-5017 or emailed to
john.riley@natick.army.mil. Since contact information can change, you may want to verify
the currency of this address information using the ASSIST Online database at
https://assist.daps.dla.mil
AMSC N/A
FSC 1670
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business