MIL-DTL-44036A
3.2 Materials and construction. Materials and construction details shall conform to the
requirements of the applicable specifications and as specified herein. A tie-down assembly shall
consist of one of the following items:
3.2.1 Load binder. The load binder shall be in accordance with the requirements of MIL-
DTL-43021.
3.2.2 Tie-down strap. The tie-down strap shall be in accordance with the requirements of
MIL-DTL-43342 and Drawing 11-1-892.
3.2.3 "Dee" ring. The dee ring shall conform to the requirements of PIA Standard PS
22046-8.
3.3 Marking. Identification marking of each component shall be in accordance with the
applicable specification or standard.
3.4 Workmanship. The workmanship shall conform to the quality established by the
applicable specification.
4. VERIFICATION
4.1 Classification of Inspections. The inspection requirements specified herein are classified
as follows:
a. First article inspection (see 4.2).
b. Conformance inspection (see 4.3).
4.2 First article inspection. First article inspection shall be performed on one complete tie-
down assembly, unless otherwise stated in the contract, when a first article sample is specified
(see 3.1). The inspection shall include the tests and examinations of 4.3.1 and 4.4. Any defect or
nonconformance shall be cause for rejection of the first article.
4.3 Conformance inspection. Conformance inspections shall include the examinations of
4.3.1 and 4.5 Sampling plans and acceptance/rejection criteria shall be as specified in the
contract or purchase order. Tie-down assemblies which fail the acceptance criteria shall be cause
for rejection of the lot.
4.3.1 Component and material inspection. Components and materials shall be inspected in
accordance with all the requirements of referenced documents unless otherwise excluded,
amended, modified, or qualified in this specification or applicable purchase document.
4.4 Examinations. Each item (see 3.2.1, 3.2.2 and 3.2.3) shall be examined for conformance
to the applicable specification.
5. PACKAGING
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business