INCH-POUND
MIL-DTL-43342F
25 April 2005
SUPERSEDING
MIL-W-43342E
14 DECEMBER 1982
DETAIL SPECIFICATION
WEBBING ASSEMBLIES, GENERAL SPECIFICATION FOR
This specification is approved for use by the Natick Soldier Center, Department of the Army,
and is available for use by all departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This document covers requirements for miscellaneous cotton and nylon webbing
assemblies used in rigging for airdrop operations.
1.2 Classification. The classification of webbing assemblies are defined as part numbers as
specified in the acquisition requirements (see 6.2).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, and 5 of this
specification. These lists do not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to
ensure the completeness of these lists, document users are cautioned that they must meet all
specified requirements documents cited in sections 3, 4, and 5 of this specification, whether or
not they are listed.
2.2 Government documents.
2.2.1 Specifications and standards. The following specifications and standards form a part
of this document to the extent herein. Unless otherwise specified, the issues of these documents
are those cited in the solicitation or contract.
Comments, suggestions, or questions on this document should be addressed to Natick Soldier
Center, ATTN: AMSRD-NSC-AD-AD, J. Riley, Natick, MA 01760-5017 or emailed to
john.riley@natick.army.mil. Since contact information can change, you may want to verify
the currency of this address information using the ASSIST Online database at
https://assist.daps.dla.mil
AMSC N/A
FSC 1670
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business