[INCH-POUND]
A-A-52197
15 August 1995
COMMERCIAL ITEM DESCRIPTION
WEIGHT, PARACHUTE PACKING
The General Services Administration has authorized the use of this
commercial item description as a replacement for MIL-W-27888B, for
all federal agencies.
1.
SCOPE.
1.1 This commercial item description describes two types of
parachute packing weights for use as packing aids.
1.2 The packing weights are intended for use by parachute
riggers for holding-canopy gores in position during the folding of
the canopy and stowing of the suspension lines when packing a
parachute.
CLASSIFICATION .
The packing
weights
shall
conform
to
the
2.
following types (see 3.1 and 7.1).
2.1 Type.
Type
I-1
compartment
Type
II - 2
compartment
Beneficial comments, recommendations, additions, deletions,
clarifications, etc. and any other data which may improve this
document should be sent to: Commander, U.S. Army Natick Research,
Development, and Engineering Center, ATTN:
SATNC-UC, Natick, MA
01760--5014.
AMSC N/A
FSC 1670
DISTRIBUTION STATEMENT A.
Approved for public release; distribution is
unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business