MIL-R-1832D
28 February 1989
SUPERSEDING
MIL-R-1832C
8 August 1977
MILITARY SPECIFICATION
RUBBER BAND, PARACHUTE SUSPENSION LINE
This specification is approved for use by all Departments and Agencies of the
Department of Defense.
1. SCOPE
1.1 Scope. This specification covers two types of rubber bands used in the
packing of parachutes.
1.2 Classification. Rubber bands shall be of the following types as
specified (see 6.2).
Type I - Natural rubber (2 inches long by 1/2 inch wide by 1/32 inch wall
thickness)
Type II - Natural rubber (2 inches long by 3/8 inch wide bY 1/16 inch
wall thickness]
2. APPLICABLE DOCUMENTS
2.1 Government documents.
2.1.1 Specifications, standards, and handbook. The following
specificatios standards, and handbooks form a part of this document to the
extent specified herein. Unless otherwise specified, the issues of these
documents are those listed in the issue of the Department of Defense Index of
Specifications and Standards (DODISS) and supplement thereto, cited in the
solicitation (see 6.2).
FSC 1670
AMSC N/A
DISTRIBUTION STATEMENT A. Approved for public release; distribution is
unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business