INCH-POUND
MIL-DTL-44036A
30 JUNE 2003
SUPERSEDING
MIL-T-44036
29 DECEMBER 1980
DETAIL SPECIFICATION
TIEDOWN ASSEMBLY, CARGO, AERIAL DELIVERY, LOAD BINDER TYPE
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for one type of load binding system in
cargo aircraft.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are cited in sections 3 and 4 of this
specification. These lists do not include documents cited in other sections of this specification or
recommended for additiona l information or as examples. While every effort has been made to
ensure the completeness of these lists, document users are cautioned that they must meet all
specified requirements documents cited in sections 3 and 4 of this specification, whether or not
they are listed.
2.2 Government documents.
2.2.1 Specifications and standards. The following specifications and standards form a part
of this document to the extent herein. Unless otherwise specified, the issues of these documents
are those listed in the issue of the Department of Defense Index of Specifications and Standards
(DoDISS) and supplement thereto, cited in the solicitation (see 6.2).
SPECIFICATIONS
Beneficial comments (recommendations, additions, deletions) and any pertinent data that may
be of use in improving this document should be addressed to: Natick Soldier Center ATTN:
AMSSB-RAD-AD(N), Natick, MA 01760-5017, using the Standardization Document
Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.
AMSC N/A
FSC 1670
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business